Usoro etiti machining kwụ ọtọ
Nka nka
| Nka nka | Nkeji | SXH-TH500 | SXH-TH630 | SXH-XW1814 | SXH-TH1311 |
| Nha tebụl ọrụ (L*W) | mm | 500*500 | 630*630 | 800*800 | 1000*1000 |
| Nọmba arụ ọrụ | Iberibe | 1 ma ọ bụ 2 | 1 ma ọ bụ 2 | 1 | 1 |
| indexing ọrụ | ° | 0.001/1 | 0.001/1 | 0.001/1 | 0.001/1 |
| T-oghere (N*W*D) | mm | 5-18*100 | 5-18*100 | 5-22*160 | 5-18*100 |
| Ibu oke arụ ọrụ | kg | 600/500*2 | 900/800*2 | 1600 | 3500 |
| Njem aka ekpe na aka nri na-arụ ọrụ (axis X) | mm | 800 | 1100 | 1800 | 1300 |
| Arụ ọrụ n'ihu na azụ njem (Z-axis) | mm | 800 | 1100 | 900 | 1300 |
| Igbe elu na ala njem (Y-axis) | mm | 800 | 800 | 1400 | 1100 |
| Ebe dị anya site na ahịrị etiti spindle ruo n'elu arụ ọrụ | mm | 125-925 | 125-1225 | 82-1318 | 50-1150 |
| Ebe dị anya site na nsọtụ spindle ruo na etiti worktable | mm | 50-850 | 50-850 | 200-1100 | 250-1150 |
| Spindle taper | BT50 | BT50 | BT50 | BT50 | |
| Ọsọ sppindle kacha | rpm | 6000 | 600 | 6000 | 6000 |
| Ọsọ ọsọ ọsọ (X/Y/Z) | m/min | 24/24/24 | 30/30/30 | 16/16/16 | 24/24/24 |
| Ụdị ụzọ ụgbọ okporo ígwè/Ụdị igwe | m/min | 3 okporo ígwè linear | 3 okporo ígwè linear | 3 - okporo ígwè siri ike | 3 okporo ígwè linear |
| Ọkọlọtọ T | Ọkọlọtọ T | Cross slide | |||
| Ikike magazin ngwá ọrụ | ibe | 24 | 24 | 24 | 24 |
| Ibu oke.tool | kg | 25 | 25 | 25 | 25 |
| Gbanwee oge akụrụngwa (ngwaọrụ gaa na ngwaọrụ) | s | 5.5 | 5.5 | 5.5 | 5.5 |
| Ịtọpụta izi ezi | mm | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 |
| Izi ezi nkwughachi | mm | ±0.003/300 | ±0.003/300 | ±0.003/300 | ±0.003/300 |
| Ibu igwe | T | 9/9.5 | 10.5/11 | 18 | 14.5 |
| Ogo elu igwe (L*W*H) | mm | 5300*3300*3570 | 5900*3500*3570 | 4900*3500*3600 | 4500*6400*3600 |
Dee ozi gị ebe a ziga anyị ya
